Christmas Series Day 19 - Christmas Trees from Toilet Paper Roll

 On the 19th Day of Christmas

Santa brought to me

Kara with "Simplistically Sassy"

Her gift for us is a post on a

"Christmas tree Ornaments

 from toilet paper rolls"

Check out Kara's Blog Here

http://wp.me/p3JAco-zJ

Daisy Corkboard's - IKEA Project

I recently attended a blog mixer to celebrate IKEA's new catalog.

After enjoying a nice breakfast and chatting with my fellow bloggers, we all had a chance to check out some of there great products. They also had a educational class on there comfy mattress sets, where we were taught the difference of how each material works and which material is best for your body. Then we of course all took a nap (JK) and tested the mattress's out ourselves.

IKEA is a fun store to not only check out there display rooms (office, bedrooms, kitchens) upstairs ,where you get a ton of inspiration, then downstairs you have more of a store/warehouse set up. I found items for future projects left and right. 

Check out there catalog: Here you can either download it to your computer, ipad or phone.

One of my great finds was a 3 pack of heat trivets for $2.99.  You can find here

these are normally used for putting a hot pot or dish on.

But I had much different plans for these babies. 

Because they are made of cork, I instantly thought of making some decorative cord boards for one of my walls. 

Ta-Da... see how cute these are. I made the flower background out of recycled cardboard and modge podged decorative scrapbook paper onto the cardboard. Once dry then I applied glue with my glue gun unto the back of the cork round and then applied directly to the middle of the flower. 

Now you can tack your important messages or notes onto the cork board. 

Happy Crafting!!!

Carrie

Butterfly Clip out of Recycled cardboard

I have been saving cardboard and plastic pieces from packaging. This butterfly's body and wings are made from recycled cardboard (embellished with some fun inks and beads). I started out making a pattern for one wing. My Wing has 3 layers.  #3 is the larger base piece of the wing, #2 is a lower layer of the wing, #1 has a top and a bottom top layer of the wing. 4 total pieces to each wing. 

Once you have the pattern trace it onto more recycled cardboard. I labeled my pieces so there would be no confusion.

Cut all pieces out and lay onto newspaper or some kind of scrap paper that can get messy. Make sure you flip all pieces on the left so they match the right side.

Spray all pieces with a base color. (both sides)

now add different colors in an abstract way on the top wing pieces.

I also outlined the top wing pieces with black ink.

Putting the butterfly together

• hot glue 5 beads together to form the body of the butterfly
• glue #3 pieces of the wing to the beads
• glue #2 Pieces to the lower half of the butterfly wings
• flue #1 pieces to the top and bottom of the wings (the bottom one should overlap #2 piece.
• bend some copper wire to use for antenna and glue to the top bead
• glue a hair clip to the back of the butterfly
• Last, I hot glued some copper beads onto the middle of body and edges of wings.

Supplies I used:

• Recycled cardboard from some craft packaging
• Hot Glue Gun & Glue
• Mister Huey's Color Mists - Dark Calico
• Luminarte - Radiant Rain - Solar Gold
• Luminarte - Radiant Rain - Apple Blossom
• Apple Barrel - White 
• Spronge Brush
• 5 beads
• copper wire
• Martha Stewart luster glass microbeads - Copper
• Hair Clip

Happy Crafting

Carrie

Linky Parties:

Six Sister's Stuff

Faux Leather Flower Hairclip Tutorial

The tutorial for today is a fantastic faux leather flower hair clip.

Supplies I used:

faux leather

Tim Holtz - Copper Mixatives alcohol ink

Mister Huey's - Dark Calico color mist

Beads in multi colors/shades

Sponge Brush

glue gun & glue

needle & thread

snap on & snap on clip

Start by drawing a single pedal (i roughed mine)

then I grabbed a piece of white faux leather that I recycled from the cover of an old address book.

trace 5 petals (with pencil) on the back (smooth side) and then cut them out.

To make a petal, pinch in the middle and then sides of the bottom of the petal. it will look like an accordion. Take thread and needle and stitch through the bottom a couple times and tie off.

Arrange the petals in the arrangement that looks best for you.

Now grab that needle and thread again and run through the bottom of each one until you have all of the petals attached on one string (top R. photo). pull the string tight and tie off. Too secure the petals from not moving. apply a dab of hot glue on the tip of the middle section, let dry. turn over and put another dab of glue to the middle of the back, let dry. Now it is ready to color and bling.

working on one petal at a time, I applied 2 drops of the copper alcohol ink and then using a sponge brush, spread all over the petal. It is ok if you can still see the white coming through. Finish all 5 petals, then move to the next step. Now spray a little of the color mist on a piece of plastic or paint palette. dip same sponge brush into the mixture and brush lightly around the edges of the petals adding a bit more darkness and depth.  Paint job done and now to finish the flower I grabbed 3 different shades and sizes of pearl beads and with the hot glue gun again i added beads until i was happy with the end result.

Flower finished. I decided to attach my flower to a snap on clip so that the flower could be used for more than a hairclip. I have snap on claws that it can snap on to also. this way I can attach it to an outfit or a bag. the possibilities are endless. 

Happy Creating!!

Carrie

Linky Parties

Six Sister's Stuff                            Tatertots and Jello                  Nifty Thrifty Things
Home Stories A to Z                     Ladybugs Blessings              Not Just A Housewife
Sugarbees Craft                          Todays Creative Blog